Shoot from the side with no blind spots! This curved, adhesive-type GoPro helmet mount offers 360-degree rotation for ultra-flexible vlogging.

　　Want to capture a close-up of your helmet from the side, cornering, but the mount won't stick securely and keeps warping? Want to switch between selfie and landscape views on a motorcycle trip, but the rotation adjustment is stuck and won't lock? Worried about the mount stripping the paint when taking off your helmet, you're hesitant to reposition it after just one application? These "perspective frustrations" in vlogging stem from the fact that standard adhesive mounts don't address the adaptability and angular flexibility of curved helmets. Motorcycle helmets often have curved sides, and vlogging requires frequent adjustments. Choosing the wrong mount will waste footage and even damage the helmet.

　　Traditional adhesive-type side mounts are prone to numerous problems: Flat adhesive pads can't adapt to curved surfaces, causing the edge to warp under wind resistance at high speeds, nearly causing the GoPro to fall. The rotating mechanism can become stuck, requiring a fidgeting process to adjust the angle, often leading to missed shots. Low-quality adhesive can leave marks, leaving scars even on high-end helmets after just one application. And the lack of image stabilization means that when riding in the mountains, the footage can be shaken and rendered impossible to correct in post-production. The GoPro Motorcycle Helmet Side Mount (360° Rotating) with a curved adhesive precisely addresses the pain points of vlogging. Its curved adhesive, universal rotating ball head, and anti-shake mechanism provide flexible and stable sideways shooting angles, while also protecting the helmet from damage during attachment and removal.

　　Why is it the ultimate sideways vlogging tool? Four key advantages unlock creative perspectives.

　　1. Customized curved adhesive pads securely adhere to curved helmets without warping.

　　Equipped with 3M VHB curved adhesive pads, the wavy design adapts to the sides of helmets with a curvature radius of 50-150mm (suitable for full-face, flip-up, and half-face helmets), increasing the contact area by 40% compared to standard flat adhesive. To attach, simply wipe the helmet surface with an alcohol wipe, apply pressure for 30 seconds, and let it sit for 30 minutes. The adhesive will then adhere perfectly to the curved surface, achieving a peel strength of 80N, equivalent to lifting eight bottles of mineral water. The adhesive remained stable in temperatures ranging from -10°C to 40°C, and it remained secure even after mountaineering at 120 km/h and heavy rain. You no longer have to worry about your device flying off.

　　2. 360° Universal Ball Head for Smooth and Stable Viewing Angle Switching

　　The ball head features a precision aluminum alloy construction, supporting 360° pan and 90° tilt adjustment. Its rotational damping is smooth and uniform, allowing for single-handed angle adjustment. The ball head also includes a built-in stainless steel locking nut. Once the viewing angle is set, a half-turn locks it in place, ensuring it stays in place even during bumpy rides. Whether shooting sideways on a curve, shooting from above at the treetops on a mountain road, or rotating 180° for a selfie explaining your route, everything is instantly captured, ensuring more natural transitions in your vlogs. Paired with a GoPro wide-angle lens, you can even capture shots with a sense of depth, "extending from the side of the helmet," for a truly atmospheric effect.

　　3. Damping Anti-Shake Structure, No Shake on Bumpy Roads

　　A rubber cushion and micro-damper are installed between the ball head and base, drawing on the vibration absorption principles of vehicle mounts to filter out 80% of motorcycle vibrations. Tested on bumpy terrain like gravel roads and speed bumps, the image shake amplitude is ≤0.3°, far exceeding the 2° shake threshold of ordinary mounts. Combined with GoPro's anti-shake mode, cornering videos shot during mountain runs require virtually no post-production editing and can be uploaded directly to TikTok and Bilibili. Fans will never again ask, "Did you film that on a tractor?"

　　4. Removable, No-Marking, No-Worry about Replacing a Helmet

　　The adhesive pad features a "strong-adhesive removable" formula. When you need to relocate it, simply heat it with a hair dryer for one minute and it's completely removed, leaving no adhesive marks on the helmet surface. It's also safe for use on high-end carbon fiber helmets. The mount is made of lightweight ABS+PC material, weighing only 35g—lighter than an egg. It's perfectly comfortable when attached to the side of your helmet, ensuring a smooth ride even during long periods. It also features a quick-release design, allowing you to remove the GoPro with a simple click. It's easy to store after parking, preventing theft.

　　Vlogging: The side-on camera captures creative angles.

　　Mountain and Cornering: Adjust the mount to a 45° pitch angle to capture the leaning vehicle through corners. Once the ball head is locked, there's no deviation. Details of the tires crossing the markings are clearly visible, and the editing, complete with engine sounds, creates a quality comparable to professional cycling videos.

　　Motorcycle Travel Time-Lapse: Attaches to the left side of the helmet and rotates 360° to capture the scenery along the way, automatically rotating 15° every 10 seconds. The footage captures the changing light and shadows of mountain roads with smooth, smooth footage, earning over 100 likes on WeChat Moments.

　　Commuting Selfie: Rotate the lens straight ahead, use GoPro Voice Control to "Start Recording," and explain your route plan while riding. The mount is lightweight and eliminates head shaking, eliminating vibration noise when recording audio.

　　Helmet Compatibility: Remove from a full-face helmet and attach to a half-face helmet. The rubber pad remains intact and securely attached. One mount meets the needs of various riding scenarios.

Read recommendations:

camera monitor cage

wooden camera cage suppliers

tripod ball head quick release plate custom

velbon ph 368 quick release plate

Sports Event Broadcasting Camera Cage